Resin Driveway Installation Questions

A permeable resin surface generally does not require planning permission because rainwater drains through rather than running off into the road. Essex local authority rules on dropped kerbs are a separate matter and are checked at survey stage. Non-permeable finishes may require permission, so the surface type matters.

It can, provided the concrete is structurally sound, free of significant cracks, and drains correctly. The site assessment confirms this before any material is ordered. If the concrete has soft spots or drainage problems, those need addressing first to avoid the new surface cracking within a year or two.

Cracks allow water to reach the sub-base, which softens it over time. A soft sub-base means any new surface, resin or otherwise, will move and crack again quickly. Addressing the base early is cheaper than excavating a failed surface and starting from scratch after water damage has spread.

Cost depends on the area size, the condition of the existing base, and how much groundwork is needed. The quote separates excavation, MOT Type 1 sub-base, edge restraints, and the resin-aggregate finish as individual line items so you can see exactly what each stage costs.

Longevity depends on the quality of the base preparation, the volume of traffic, and basic maintenance. A surface laid over a properly compacted sub-base with correct drainage falls will hold its finish and stay bonded significantly longer than one laid over a poorly prepared or uneven base.