Skip to content

Resin Replacement

Block Paving Removal & Resin Replacement in Chigwell

A stable, weed-free resin surface starts with what the old blocks are hiding underneath.

  • Itemised Quotes
  • Base Assessment First
  • Local Know-How
Modern garden patio with an outdoor kitchen area, stylish resin-bound surfacing, and vibrant plants next to a contemporary house.

What Goes Wrong

Where block-to-resin conversions fail, and how to avoid it

The finish you see depends entirely on decisions made before the resin is mixed.

Skipped Base Check

Laying resin over a sub-base that has shifted or become waterlogged means the new surface will sink and crack within months.

Full Base Inspection

Every soft spot and failed section is identified before resin work begins, so the base meets specification first.

Wrong Drainage Fall

A surface laid without a consistent drainage gradient traps water at the edges, undermining the base and the resin bond.

Gradient Set at Base Stage

The drainage fall is established during base preparation, not corrected after the resin is down.

Edging Left in Place

Old kerb arrangements designed for block paving often sit at the wrong height for a resin surface, causing edge lift and water ingress.

Edging Repositioned

Edge restraints and kerbs are assessed and reset to suit the finished resin depth before any surfacing begins.

Single Lump-Sum Price

A combined quote hides whether the base rebuild is included, leaving homeowners with unexpected costs mid-job.

Line-by-Line Quotation

Block removal, base preparation, edging, and resin bound finish are quoted as separate items so every cost is visible upfront.

Scope of Work

What the removal and replacement covers

From lifting the first block to the finished resin surface, here is what the work involves.

Block Lifting & Disposal

All existing blocks removed and cleared from site.

Sub-Base Assessment

Compaction, level, and drainage gradient checked before any resin work.

Base Rebuild Where Needed

Failed sections broken out and reinstated to correct depth.

Edge Restraint Installation

Edging and kerbs repositioned to suit the new resin surface.

Resin Bound Aggregate Finish

Mixed and trowelled to a consistent depth with drainage fall.

Drainage Channel Fitting

Channel drainage added where surface water needs directing.

Removal to Resin

Why block paving fails, and what the base looks like underneath

Lifting the blocks is straightforward; what the base reveals underneath is what determines the cost and scope of the replacement.

Request a Survey

Block paving fails for predictable reasons: jointing sand washes out, individual blocks sink as the sub-base settles, and weeds establish in the open joints. On older semi-detached homes common in Chigwell, original block paving driveways are now showing these signs after years of use. Lifting the blocks is the first step, but it is what the removal exposes that matters, a compacted, level sub-base in good condition is a very different starting point from one that has shifted or become waterlogged.

Once the blocks are removed and disposed of, the sub-base is inspected for compaction, drainage gradient, and any soft spots. Where the existing base is sound, it is cleaned and prepared for the resin bound surface. Where it has failed, it is broken out and rebuilt to the correct depth and compaction before any resin work begins. Front drives in Chigwell frequently feature traditional edging and kerb arrangements that are assessed at this stage and repositioned if needed.

With the base confirmed and edge restraints set, resin bound aggregate is mixed and trowelled across the surface to a consistent depth and drainage fall. The finished surface is permeable, weed-resistant, and has no open joints for sand to wash from. The itemised quote separates block removal, base preparation, edging, and the resin bound finish so every stage of the cost is visible before work starts.

Why Choose Us

Why Chigwell Resin Driveways for block paving replacement?

We schedule the full removal-to-resin process for homeowners, not just the surface layer.

Itemised Quotes, Every Time

Block removal, base work, edging, and resin finish are quoted as separate line items, no hidden bundled costs.

Base Assessment Before Commitment

The site visit surveys the sub-base condition before any price is agreed, so the quote reflects the actual job.

Local Know-How

We schedule your own site visit, not a generalist picking up extra work.

Full Scope, Single Point of Contact

From block lifting to finished resin surface, the job stays with one contractor rather than splitting across trades.

Drainage Covered in the Quote

Surface drainage and channel fitting are assessed and priced at survey stage, not added as extras mid-job.

A modern brick house with a newly installed dark grey resin driveway, landscaped front garden, and an oak timber porch.
A newly installed light grey resin driveway with dark grey block paving borders and a light brick-effect pattern, leading to a modern brick house with a dark blue front door and a beautifully landscaped garden.

The Process

From first enquiry to finished driveway

Request a Survey

  1. 01

    Describe Your Driveway

    Tell us the approximate size, what is down there now, and any drainage or edging issues you have noticed.

  2. 02

    Survey & Itemised Quote

    The site visit assesses the sub-base, checks drainage falls, and returns a quote with every stage priced separately.

  3. 03

    Removal, Prep & Resin Finish

    Blocks are lifted, the base is prepared or rebuilt as needed, and resin bound aggregate is laid to the agreed specification.

Pricing Estimates

Typical Block Paving Removal & Resin Replacement Prices

JobTypical cost
Small removal and replacement£2,500-£4,000
Average driveway replacement£4,500-£7,000
Large replacement project£7,000-£10,500
Replacement with heavier groundwork£8,500-£12,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about switching from block paving to resin

  • Can old block paving be taken up and replaced with resin?

    Yes. The old blocks are lifted first, then the base is checked and prepared before the resin surface is installed. The condition of the existing ground matters because the finish depends on a stable, well-prepared base.

  • Do you always need to remove every block?

    Not always, but any loose, uneven, or failing sections still need proper attention regardless. The base assessment after lifting determines exactly how much preparation is required before resin work can begin.

  • What happens if I delay replacing a failing block paving driveway?

    Sinking blocks and failed jointing sand allow water to penetrate the sub-base. Over time this accelerates settlement, widens the affected area, and increases the amount of base rebuild needed, making the eventual replacement more involved and more costly.

  • Will resin stop weeds and loose joints?

    A resin bound surface removes the open joints that block paving has, so there is far less space for weeds to establish. Proper base and edge preparation is still essential to keep the new surface stable long term.

  • How do I know if my driveway needs full replacement rather than another repair?

    If blocks are sinking or moving in multiple places, or repairs keep failing within a short time, the sub-base is likely the underlying issue. A base condition check will show whether the existing ground is still worth keeping or needs rebuilding.

More questions about Block Paving Removal & Resin Replacement?

Tell Us About Your Driveway

Describe the size, the existing surface, and how it drains. We’ll schedule a site visit to survey the base and quote every stage separately.

Request a Survey